15kV 200A Insulated Protective Cap

Product Detail

Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 15/25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated Protective Cap can be used for permanent or temporary。Installation on 200A loadbreak bushings, junctions or insulated stand off bushing. 1、INSULATION: High quality, peroxide-cured EPDM rubber formulated, mixed and molded in-house for consistent and reliable field performance. 2、SEMI-CONDUCTIVE SHIELD: High quality EPDM rubber provides protective dead front shield that make sure they have grounding 3、GROUNDING EYE: Three tabs molded into a semi-conductive shield for the attachment of a ground wire to maintain dead front safety. 4、PULLING EYE: Stainless steel reinforced for positive shotgun stick switching operations.

Description	Reference No.	Continuous operating voltage	Impact withstand voltage
200A 15kV Insulate protective cap	AH JYM-15/200	15kV	200A

Product Tags

Protective Caps

protective Insulation Caps

15kV 200A Insulated Protective Cap Related Video:

15kV 200A Insulated Protective Cap

Related Products